https://forum.andowson.com/posts/listByUser/44 JForum - http://www.jforum.net
Passive mode off.
200 Type set to I
Interactive mode off.
250 CWD command successful
local: test.txt remote: test.txt
200 PORT command successful
550 test.txt: No such file or directory
221 Goodbye.

是不是因為ftp.sh裡的
dir=/
filename=test.txt
這兩行的設定要改？若是的話，請問要改為什麼？謝謝！
不好意思，一直打優！
]]> https://forum.andowson.com/posts/preList/81/1133 https://forum.andowson.com/posts/preList/81/1133 GMT ftp.log檔內容如下：
?Invalid command
?Invalid command
?Invalid command
?Invalid command
?Invalid command
331 Password required for xxxxxx
530 Login incorrect.
Login failed.
?Invalid command
?Invalid command
?Invalid command
?Invalid command
?Invalid command
?Invalid command
?Invalid command
530 Please login with USER and PASS
?Invalid command
?Invalid command
?Invalid command
mput test.txt^M^M? 530 Please login with USER and PASS
Passive mode refused.
?Invalid command
?Invalid command
221 Goodbye.
]]> https://forum.andowson.com/posts/preList/81/1131 https://forum.andowson.com/posts/preList/81/1131 GMT 我看其/tmp/ftp.log檔顯示如下：
Remote system type is UNIX.
Using binary mode to transfer files.
331 Password required for xxxxxx
530 Login incorrect.
Login failed.
然而我在ssh底下試著打入ftp指令登入到遠端，打入同於ftp.cfg裡的帳號、密碼，都可以正常登入！
不知問題在哪？
還望不吝賜教，謝謝！
]]> https://forum.andowson.com/posts/preList/81/1128 https://forum.andowson.com/posts/preList/81/1128 GMT 再者，要再請教你：請問若我的資料庫系統是mysql，則backup.sh，要怎麼更改？
而您在「使用方式」的第4點提到「.編輯backup.ini, webapp.ini及ftp.cfg, 修改backup.sh上面的一些參數。」其中的「 修改backup.sh上面的一些參數。」是要修改哪些「參數」？可否教導一下小弟，不好意思，因為小弟對於sh的語法不解，看到您這麼好的東西，想拿來運用，又怕設錯，只好一再打擾您！先謝謝了。]]> https://forum.andowson.com/posts/preList/81/900 https://forum.andowson.com/posts/preList/81/900 GMT https://forum.andowson.com/posts/preList/81/896 https://forum.andowson.com/posts/preList/81/896 GMT